[categoryname]

Prayer Box Bracelet Project

Prayer Box Bracelet Project
B588

This project sponsored by:

Quantity of Items Needed
16 Swarovski Bicone 5301 5mm Erinite (AC5093)
1 Prayer Box Heart Charm 15x18mm Pewter Antique Silver Plated (CM427)
16 Swarovski Cubes 5601 6mm Crystal Vitrail Medium (CU6489)
1 Designer Clasp with Garnet 12mm Sterling Silver (DC267)
32 Eye Pin 1" 22 Gauge Sterling Silver (EP125)
2 Jump Ring Round Open 4mm Sterling Silver (JR405)
2 Split Ring 5mm Sterling Silver (SS415)

Instructions.

1) Using PL400, attach one SS415 to either side of DC267.

2) Using both PL491 and PL490, attach one JR405 to each of the SS415. Before closing the last JR405, attach CM427. Close the jump ring.

3) Take one EP125 and thread on one CU6489. Cut off all but 1/4" of the remaining wire with PL495. Make a loop with PL491. Repeat fifteen more times.

4) Take one EP125 and thread on one AC5093. Cut off all but 1/4" of the remaining wire with PL495. Make a loop with PL491. Repeat fifteen more times.

5) Take one of the cubed eye pins and open the loops slightly. Attach one end to the JR405 and one end to the loop on a biconed eye pin. Close the loops.

6) Repeat the pattern of attaching one cubed eye pin to one biconed eye pin until a chain of 16 crystals has been created. Attach the loop of the last biconed eye pin to the other JR405.


To Finish.
7) Make another chain with the remaining crystaled eye pins, but this time start with a biconed eye pin. Attach the final loop of the chain to the other JR405.
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top