Vintage Fashion Bracelet Project

Vintage Fashion Bracelet Project
B895

This project sponsored by:

1) Take one of the 9" lengths of wire and thread on one Crimp Tube, one 3mm Round Bead, and one half of the Toggle Clasp. Take the wire around and back through the round bead and the crimp tube. Pull so that the wire is fairly close to the loop on the Toggle clasp (about 3mm or so) and then crimp the tube shut with your Crimping Pliers. Cut the excess wire tails away with your Side Cutters. Repeat this step with the other length of wire. Use the first indent on your Crimping Pliers to close a crimp cover around each of the closed crimp tubes.

2) Start your beadwork for each of the strands.** indicates bead over both wires
1
Czech F.P. Donut Jet 3x5mm
1
3mm Round Beads Gold Plated
1
Beaded Two Hole Link 11x4mm **
1
3mm Round Beads Gold Plated
1
Spacer 3.7x1mm Gold Plated **
1
Button Bead **
1
Spacer 3.7x1mm Gold Plated **
1
3mm Round Beads Gold Plated
1
Beaded Two Hole Link 11x4mm
1
3mm Round Beads Gold Plated

- Repeat this three more times

3) Thread a Czech F.P. Jet Donut, a Crimp Tube, a 3mm Round Gold Plated Bead, and the other half of the Toggle Clasp onto each of the wires. Then take the wires around and back through both the 3mm Round Bead and the Crimp Tube. Pull the wires so that both cinch up to within 3mm of the loops on the Toggle Clasp. Crimp the Tube shut with your crimping pliers and cut the excess wire away with your Side Cutters.

4) Use the first indent in your Side Cutters to close a Crimp Cover around each of the closed Crimp Tubes.

Quantity of Items Needed
36 Round Bead 3mm Gold Plated (BD302)
4 Crimp Tube Seamless 2x2mm Gold Plated (BD363)
4 Crimp Covers 4mm Gold Color (BD544)
8 Spacer 3.7x1mm Gold Plated (BF332)
4 Czech Pressed Glass Button Bead 13mm Jet AB (CG115)
10 Czech Fire Polished Donut 3x5mm Jet (GD3398)
8 Beaded 2-Hole Link 11x4mm Pewter Antique Gold Plated (LK058)2 9" lengths of Beadalon Wire .015" 30ft Satin Gold Color 19 Strand (SG015)
1 Heirloom 2-Loop Toggle Clasp 18x15mm Pewter Gold Plated (TC509)

There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top