1) Thread one of the Flat Flower Beads and an Abalone Shell Oval onto one of the Headpins and make a simple loop with the remaining wire using your Chain Nose and Round Nose Pliers. Cut the excess wire off with your Side Cutters. Open the loop that you just made slightly with your Chain Nose and Round Nose Pliers (just like opening a jump ring) and thread the loop onto one of the connector loops on the Swirl Sterling Silver Connector. Close the loop completely.

2) Open the loop at the base of one of the Eariwires with your Chain Nose and Round Nose pliers and slide this open loop onto the other connector loop on the Swirl Sterling Silver Connector. Close the loop on the Earwire completely.

3) Repeat these two steps again to create the other earring.

Quantity of Items Needed
2 Bead Bali Style Flat Flower 4x1.2mm Sterling Silver (BD247)
2 Oval Connector 20x12mm Sterling Silver (CN471)
2 Bali Style Fish Hook Ear Wires 25mm Sterling Silver (EW004)
2 Head Pin 2" 20 Gauge Sterling Silver (HP215)
2 Abalone Shell Oval Beads 8x12mm (SH131)