[categoryname]

Olive Drop Earring Project

Olive Drop Earring Project
E818

This project sponsored by:

1) Take one Headpin (HP104), and thread on one Pearl (PR743), one Round Bead (BD304), and another Pearl. With the remaining wire, make a simple loop with your Chain and Round Nose Pliers. Cut any excess wire away with your Side Cutters (PL495).

2) Take one Eyepin (EP104), and thread on one Pearl (PR743), one Round Bead (BD304), and another Pearl. With the remaining wire, make a simple loop with your Chain and Round Nose Pliers. Cut any excess wire away with your Side Cutters (PL495).

3) With your Chain Nose and Round Nose Pliers, open one of the loops on the Eyepin slightly, and attach the loop on the Headpin to this loop. After attached, close the loop on the Eyepin securely.

4) With your Chain and Round Nose Pliers, open the connector loop on the bottom of one of the Leverback Earrings. Attach the free loop from the Eyepin to the connector loop on the Leverback Earring. Close the connector loop on the earring securely.

5) Repeat all steps to create the other earring.

Quantity of Items Needed
4 Gold Filled Round Bead 2.5mm (BD254)
2 Gold Filled Eye Pin 1" 24 gauge (EP104)
2 Gold Filled Head Pin 1" 24 gauge (HP104)
8 Freshwater Potato Pearl Peacock Dark Grey 6-7mm (PR743)
2 Gold Filled Lever Back with Shell (SH206)
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top