Moonless Night Earring Project

Moonless Night Earring Project
E889

This project sponsored by:

1) Open two of the Jump Rings and attach one to each of the two spaces at the top of the Gunmetal Connector. Close these jump rings securely. Open another Jump Ring and go through the top of the two connected Jump Rings at the top of the Gunmetal Connector. Close this Jump Ring as well. Open the loop on the Gunmetal Earwire the same way that you would a jump ring, and go through the last Jump Ring connected. Close the loop on the Earwire.

2) Open two more Jump Rings, and attach one to each of the two spaces at the bottom of the Gunmetal Connector. Close these jump rings securely. Open another Jump Ring ans go through the bottom of the two connected Jump Ring at the bottom of the Gunmetal Connector. Before closing this Jump Ring, thread on one of the Denim Blue Briolette Pendants. Close this Jump Ring securely.

3) Squeeze a small amount of the G-S Hypo Cement onto a scratch piece of paper. Pick up one of the Denim Blue Flat Backs with your tweezers and gently coat the back of the Flat Back by skimming the surface of the glue. Fit the Flat Back into the indent in the middle of the Gunmetal Connector. Allow to sit undisturbed for at least 30-60 mins (the longer you let it set, the better hold the cured glue will have).

4) Repeat all steps to create the other earring.

Quantity of Items Needed
2 Swarovski Briolette Pendant 6010 11x5.5mm Denim Blue (BR5266)
2 Jewelry Connector 19mm Gunmetal Plated (CN5013)
12 Jump Ring 4mm Gun Metal Plated (JR225)
2 Swarovski Xilion Rose Flat Back 2058 3mm Denim Blue (RF3266)
1 G-S Hypo-Tube Cement (GL400)

There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top