1) Take the connector on the Earwire and open it just like a jump ring with your Chain and Round Nose pliers. Attach this to the top connector on the Chandelier Part (PD2023). Close the connector.

2) Take one of the Headpins (HP215) and thread on one Coral Round Bead (RB4396). Make a wrapped loop with the remaining wire and be sure to attach the loop to the single loop on the inside of the Chandelier part before wrapping the loop shut. Cut any excess wire away with your Side Cutters (PL495).

3) Take two more Headpins (HP215) and thread on one Siam Teardrop (DR6306) onto each, tapered side pointing down toward the end of the headpin. Then, thread on one Coral Round Bead (RB4396) onto each of the headpins. Make a wrapped loop with each of the headpins, attaching each to the outside connector loops on the bottom of the Chandelier Part. Cut away any excess wire away with your Side Cutters (PL495).

1) Take another Headpin (HP215) and thread on one Coral Round Bead (RB4396), a Siam Teardrop (DR6306) - this one will have the tapered end pointing up, and another Coral Round Bead (RB4396). Make another wrapped loop, making sure to attach the loop to the center connector loop at the bottom of the Chandelier Part before wrapping the wire.

2) Repeat all steps to create the other earring. Gorgeous!

Quantity of Items Needed
6 Swarovski Tear Drop Beads 5500 9x6mm Siam AB (DR6306)
8 Head Pin 2" 20 Gauge Sterling Silver (HP215)
2 Chandelier Earring 29x24mm Sterling Silver (PD2023)
10 Swarovski Round Crystal Bead 5000 4mm Dark Red Coral (RB4396)
2 Ear Wire Flat Fish Hook with Spring 23mm Sterling Silver (SH305)