[categoryname]

Jupiter Necklace

Jupiter Necklace
N821

This project sponsored by:

Quantity of Items Needed
33" of Gold Plated Chain (CN972)
10 Gold Color 20ga Headpins (HP252)
1 Gold Plated 4mm Jump Ring (JR201)
1 Gold Plated 13x7 Lobster Claw Clasp (CL312)
10 26x18mm Lampwork Beads (GB1052)

Instructions.

1) Take your Carbide Cutters and cut the fifth link away from the end of the length of chain (CN972). Take one Headpin (HP252) and flush-cut the flat head away from the rest of the wire. Make a wrapped loop with one end of the cut Headpin wire, making sure to attach the loop to the length of chain that you cut away (this length of chain should be four links long).

2) Thread one Lampwork Bead (GB1052) onto the wire from the previous step, and make a wrapped loop with the remaining wire. Attach this loop to the other length of chain.

3) Repeat steps #1 and #2 until you have 10 beads attached with eleven 4-link chain lengths in-between.

To Finish.
4) Open the Jump Ring with your Chain nose and Round nose Pliers, and use it to attach the Lobster Claw Clasp (CL312) to the last link in the last length of chain attached. Make sure to close this Jump Ring securely.

You can wear this necklace either at an opera length, or wrap the necklace onto itself to wear it as a multiple strand necklace. Just attach the Lobster Claw Clasp to any free link in the chain to wear the necklace and you're set!
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top