Cross My Heart Earring Project

Cross My Heart Earring Project
E2045

This project sponsored by:

  1. Using your 1.8mm hole punch plier, punch a hole on each side of the short arm of the cross about 2mm from the edge. Repeat for the second side
  2. Attach one medium oval jump ring to each of the four holes. Repeat for the second side.
  3. Thread one head pin through from the bottom to the top of (1) Swarovski Cross Bead. Create a simple loop. Repeat 5 times more.
  4. Add one Cross charm made in step 3 to each of the jump rings added in step 2 omitting the jump ring at the top of the cross. Repeat for the second side.
  5. Slip onto one earring blank (1) Swarovski Bicone bead. Turn a simple loop. Attach to the remaining jump ring on the top of the cross. Repeat for the second side.
Quantity of Items Needed
  • 6 pcs Swarovski 5378 Cross Beads
  • 2 pcs Swarovski 5328 Bicone Beads
  • 2 pcs TierraCast® Drilled Hammertone Cross
  • 6 pcs 2" Silver Head Pins
  • 1 pair Silver Earring Wire
  • 8 pcs Silver Oval Jump Rings
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top