Coral Filigree Earring Project

Coral Filigree Earring Project
E927

This project sponsored by:

1) Take two of the Headpins and thread one 3mm Round Bead, a 4mm Dark Red Coral bicone, and another 3mm Round Bead onto each. With your Chain Nose and Round Nose pliers, make a simple loop. Cut off any excess wire with your Side Cutters. Before these loops are closed completely, attach one to each of the outside connector loops at the base of one of Brass Filigree Earrings.

2) Take another Headpin and thread on one 6mm Dark Red Coral bicone, a 3mm Round Bead, a 4mm Dark Red Coral bicone, and another 3mm Round Bead. With your Chain Nose and Round Nose pliers, make a simple loop. Cut off any excess wire with your Side Cutters. Before this loop is closed completely, attach it to the center connector loop at the base of the Brass Filigree Earring the other two beaded Headpins are attached to.

3) Open the connector loop at the base of one of the French Hook Earwires, and thread onto the connector loop at the top of the Brass Filigree Earring that all of the beaded Headpins are attached to.

4) Repeat all steps to create the matching earring.

Quantity of Items Needed
6 Swarovski Crystal Bicone Beads 5301 4mm Dark Red Coral (AC4396)
2 Swarovski Crystal Bicone Beads 5301 6mm Dark Red Coral (AC6396)
12 Round Bead 3mm Gold Plated (BD302)
2 Brass Chandelier Part 25x15mm (CN472)
6 Head Pin 1-1/2 inch 24 gauge Gold Color (HP114)
2 French Hook Wire Flat With Spring Gold Plated (SH302)

There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top