[categoryname]

Chandelier Bicones

Chandelier Bicones
E405

This project sponsored by:

Instructions.


1) Take your eye pin (EP725)

Start your beadwork.
2
3mm Black Diamond Bicone
1
Sterling Silver Spacer Bead
1
4mm Jet Bicone
1
Sterling Silver Spacer Bead
1
4mm Crystal Bicone
1
Sterling Silver Spacer Bead
1
4mm Jet Bicone
1
Sterling Silver Spacer Bead
2
3mm Black Diamond Bicone


3) Bring the eye pin through the center hole of the bead cap (BC838) and make a loop.

4) Attach the loop to the earring (EW005).

5) Take a headpin (HP215).

6) Attach 1-3mm Jet Bicone (AC3398) to a head pin and make a small loop just above the top of the bead.

7) Cut off excess headpin.

8) Repeat for a total of 2-3mm Jet Bicones dropping down. And 1-4mm Jet crystal.

9) Attach these to the bottom part of your beaded eye pin. Be sure to place the 4mm drop in the center.

10) Take a headpin (HP215)

Start your beadwork.
1
4mm Jet Bicone
1
Sterling Silver Spacer Bead
1
4mm Black Diamond Bicone
1
Sterling Silver Spacer Bead
1
4mm Crystal Bicone
1
Sterling Silver Spacer Bead
2
3mm Black Diamond
1
Sterling Silver Spacer Bead
1
3mm Jet Bicone
1
Sterling Silver Spacer Bead


11) Make a loop at the using your round nose pliers.

12) Repeat 3 more times for a total of 4 beaded headpins.

13) Take a Headpin (HP215)

Start your beadwork.
1
4mm Crystal Bicone
1
Sterling Silver Spacer Bead
2
4mm Jet Bicone
1
Sterling Silver Spacer Bead
1
4mm Black Diamond Bicone
1
Sterling Silver Spacer Bead
2
3mm Jet Bicone
1
Sterling Silver Spacer Bead

14) Make a loop just above the last bead.

15) Cut off excess wire.

16) Repeat for a total of 2 beaded head pins. Set aside.

To Finish.

17) Attach 2 of the longer beaded headpins to the outer circles on the bead cap side by side.

18) Attach 1 smaller beaded headpin to the outer circle of the bead cap next to the longer one.

19) Attach the other 2 longer beaded headpins side by side to the outer circles of the bead cap.

20) Attach your last shorter beaded headpin to the last circle on the bead cap.

You should have 2 long ones together and a short one and two long ones again and a short one

Repeat all of the steps above for your other earring.
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top