1) Take one of the Headpins and cut off the ball end with your Side Cutters. Create a loop with your Chain and Round nose pliers; attaching one of the Briolettes to the loop before closing it. Now, thread on a bead cap, one of the Rounds, followed by another bead cap. With your Chain nose and Round nose pliers, make a wrapped loop with the remaining Headpin wire and then slide that loop over the connector on one of the Fish Hook Earwires (you may have to widen the connector a bit like you would open a jump ring). After attaching, make sure that connector loop at the base of the Earwire is closed securely.
2) Repeat step #1 to create the other earring.
Quantity of Items Needed
2 Corrugated Bead Cap 5mm Base Metal Antique Brass Plated (BC1034)
2 Swarovski Briolette Pendant 6010 13x6.5mm Air Blue Opal (BR6285)
2 Head Pin with 2mm Ball 2" 22 gauge Antique Brass Plated (HP174)
2 Swarovski Round Crystal Bead 5000 10mm Air Blue Opal (RB1285)
2 Fish Hook Ear Wires 24mm Antique Brass Plated (SH307)