1) Take one of the Headpins (HP153) and thread on one Czech Fire Polished Donut (GD3008), one Cane Glass Bead (FG101), followed by another Czech Fire Polished Donut. With your Chain Nose and Round Nose pliers, make a simple loop with the remaining Headpin wire, making sure to cut off any excess with your Side Cutters.

2) Open the loop at the base of one of the Lever Back Earrings (LB401) with your Chain Nose pliers, and slip the simple loop that you just created onto this opened loop. Close the loop securely with your Chain Nose pliers the same way that you opened it.

3) Repeat steps one and two to create the other earring.

Quantity of Items Needed
2 Lever Back Earrings 15mm Antique Silver Plated (EW031)
2 Cane Glass Beads - Red - White and Blue Mix (FG101)
2 Czech Fire Polished Donut 3x5mm Ruby (GD3008)
2 Head Pin 1.5" 21 gauge Silver Plated (HP153)