Make these shimmering Iridescent Red Drop Earrings with TierraCast Faceted Settings and Swarovski Crystals.

• 2 pcs 10mm Crystal Iridescent Red Pearls
• 2 pcs 12mm Crystal Iridescent Red Pearls
• 2 pcs 14mm Crystal Rainbow Dark Rivolis
• 1 pair Ear Wires
• 2 pcs 14mm TierraCast Rivoli Settings
• 6" 20 gauge wire
• 5 minute two part epoxy

Let's Begin

1. Mix a small amount of epoxy. Glue the Crystal Rainbow Dark Rivoli into the Rivoli Setting. Repeat one more time with second setting and set aside to cure.
2. Cut the wire into four 1½" pieces
3. Using one piece of wire, make a simple loop, and slide on one of the 10mm Iridescent Red Pearls and make a simple loop to close. Repeat one more time and set aside.
4. Using one piece of wire, make a simple loop, and slide on one of the 12mm Iridescent Red Pearls and make a simple loop to close. Repeat one more time and set aside.
5. Take one Rivoli Setting from Step 1 and add on one pearl component from Step 4. Then add on one pearl component from Step 3. Then attach the ear wire. Repeat to make a second earring.

Tool Tip

• Consult our Jewelry Making Techniques for a guide on how to make a simple loop.