Celestial Torsade Necklace

Celestial Torsade Necklace
N2043

This project sponsored by:

This project uses Swarovski BeCharmed Beads and Crystal Bicone Beads in a unique twisting arrangement. Follow our suggested products below or create your own unique color combinations.

Quantity of Items Needed
QuantityItemItem ID
625Crystal Silver Shade Swarovski Bicone BeadsAC4501
4Crystal Golden Shadow Swarovski Pavé BeadsPB8317
1Crystal Silver Shade/Greige Swarovski BeCharmed BeadBC15284
1Crystal Rose Gold/White Opal Swarovski BeCharmed BeadBC15234
1Jet Hematite/Crystal Golden Shadow Swarovski BeCharmed BeadBC15280
120mm Silver Plated Toggle ClaspTC549
6Large Hole Bead AlignersBC575
102x2mm Crimp Beads BD315
28mm jump rings JR805
66mm jump rings JR605
120" length.018 beading wire BW018
Let's Begin
  1. Strands 1 & 5: Cut a 22” pieced of beading wire. String one end through a crimp bead, then through an 8mm jump ring and back through the crimp bead. Crimp the bead to secure. String on 34 4mm Bicone Beads, one 8mm Pave Bead, 31 4mm beads, one 8mm bead and 34 4mm beads. Repeat the crimping process from step 1 attaching this end to the other 8mm jump ring. Create a similar beaded strand for strand 5.
  2. Strands 2 & 4: Cut another 22” piece of beading wire and repeat the crimping process as done in step 1 making sure to attach this strand between strands 1 & 5. String on 122 4mm Bicone Beads. Repeat the crimping process at the other end as done at the end of step 1, making sure to add this strand between strands 1 & 5. Create a similar beaded strand for strand 4 making sure to attach it between strands 1 & 5.
  3. Strand 3: With the remaining piece of wire repeat the crimping process as done in step 1 making sure to attach this strand between strands 2 & 4. String on 47 4mm Bicone Beads, one 8mm bead aligner, one 15mm Swarovski BeCharmed Bead and one 8mm bead aligner. String on 11 more 4mm Bicone Beads, one bead aligner, one 15mm Swarovski BeCharmed Bead and another bead aligner. Add 11 more 4mm beads, one bead aligner and the 15mm Swarovski BeCharmed Bead, one bead aligner and 47 4mm Bicone Beads. Repeat the crimping process from step 1 attaching this end to the other 8mm jump ring between strands 2 & 4
  4. Attach three 6mm jump rings to the loop at one end of the toggle and to the 8mm jump ring holding the 5 beaded strands. Repeat for the other end of the toggle.
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top