Winter Wonderland Earring Project

Winter Wonderland Earring Project
E1050

This project sponsored by:

1) Open the loop at the base of one of the eyepins and attach this loop to one of the "arms" of the filigree. Close the eyepin loop.

2) Thread one briolette bead onto the eyepin wire and with your Chain Nose and Round Nose pliers, make a simple loop. Use your Side Cutters to trim off the excess wire before finishing the loop.

3) Open the loop at the base of one of the earwires. Thread this onto the wire that you just created in step #2. Close the earwire loop completely.

4) Repeat all steps to create the matching earring.

Quantity of Items Needed
2 Eye Pin 2.5" 21 gauge Silver Plated (EP303)
2 Lever Back Earrings 15mm Silver Plated (EW026)
2 Swarovski Filigree 62004 Sterling Plated Crystal AB (FG4201)
2 Swarovski Briolette Bead 5040 8x5.25mm Crystal AB (SD8001)

There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top