Tagua Nut Necklace

Tagua Nut Necklace
N653

This project sponsored by:

Instructions.

1) Take the 24" length of chain (CN207) and fold in half. Open one Jump Ring (JR705) with your chain nose and round nose pliers (PL490 and PL491), and use it to attach one Soft Jade Tagua Nut Pendant (TN115) to the middle link on the chain. Close the jump ring securely.

2) Count three links (I'm using the large links in the chain for counting, not the small figure eight links) off to both the left and the right. As in step #1, open one Jump Ring for each side, and attach one Peacock Tagua Nut Pendant (TN101) to one side, and one BlueBell Tagua Nut Pendant (TN102) to the other. Close both Jump Rings (JR705) after doing this.

3) Count two links out to the left and right from the last two Tagua Nut Pendants attached in step #2. Open two Jump Rings (JR705) for each side and attach one Soft Jade Tagua Nut Pendant (TN115) to either side. Close both Jump Rings.

4) Count four links out to the left and right from the last two Tagua Nut Pendants attached in step #3. Open two more Jump Rings (JR705) for each side and attach one Tahitian Teal Tagua Nut Pendant (TN109) to either side. Close both Jump Rings.

5) Count three links out to the left and right from the last two Tagua Nut Pendants attached in step #4. Open two more Jump Rings (JR705) for each side and attach one BlueBell Tagua Nut Pendant (TN102) to either side. Close both Jump Rings.

To Finish.
6) Count two links out to the left and right from the last two Tagua Nut Pendants attached in step #5. Open two more Jump Rings (JR705) for each side and attach one Peacock Tagua Nut Pendant (TN101) to either side. Close both Jump Rings.

7) Open the last Jump Ring (JR705) and use this to attach the Lobster Clasp (CL465) the last large link of the chain on either side. Done!!
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top