1) Take one of the 3" lengths of wire and thread one Crimp Tube (BD315) onto the wire. Take the end of the wire through the hole on the Oceanblue Teardrop (SP6376) and then around and back through the Crimp Tube. Reposition the wire and Crimp Tube to have the wire sit just right on the Teardrop, and then crimp the Crimp Tube shut with your Crimping Pliers (PL125). Cut away excess wire with your Side Cutters (PL495), then use the first indent in your Crimping Pliers to close a Crimp Cover (BD610) around the crimped tube.
2) Thread one Montana Bicone (AC6893) onto the wire, followed by another Crimp Tube. Thread on one of the Fish Hook Earrings (SH105) - close the connector loop more securely with your Chain Nose Pliers if you need to - and then take the wire around and back through the Crimp Tube. Pull the wire so that it matches in size with the loop going through the Teardrop pendant below it. Crimp the Crimp Tube closed with your Crimping Pleirs and cut away any excess wire with your Side Cutters (PL495). Close another Crimp Cover around the crimped tube with the first indent in your Crimping Pliers (PL125).
3) With your Chain Nose pliers, make a 90 bend with the connector loop on the Fish Hook Earwires so that the loop is flush with the front of the Earwire. Repeat all of these steps to create the other earring.
Quantity of Items Needed
2 Swarovski Crystal Bicone Beads 5328 6mm Montana Blue (AC6893)
2 Crimp Tube Seamless 2x2mm Sterling Silver (BD315)
2 Crimp Cover 3mm Sterling Silver (BD610)
6" Beadalon Wire .018" 15ft Silver Plated 19 Strand (BW218)
2 Ear Wire Fish Hook 18mm Sterling Silver (SH105)
2 Swarovski Multi-Color Teardrop 6100 24x12mm Ocean Blue (SP6376)