Shell Flower Necklace Project

Shell Flower Necklace Project
N2010

This project sponsored by:

1) Take the 22" length of wire and thread on one crimp tube and one half of the filigree clasp. Take the wire around and back through the crimp tube. Pull so that you have about 4mm from the tube and the loop on the clasp. Crimp the tube shut and then close a crimp cover over the top of the crimped tube. Snip away the excess wire with your side cutters.

2) Thread on one onyx bead, a 3mm bead, two onyx beads, a 3mm bead, one onyx bead, a 3mm bead and two more onyx beads.

3) Thread on a spacer bead, a coral bead, another spacer bead, two onyx beads, a 3mm bead, one onyx bead and another 3mm bead.
4) Thread on two onyx beads, a spacer bead, coral bead, spacer bead, two onyx beads, a 3mm bead, an onyx bead and another 3mm bead.
5) Thread two onyx beads, a spacer bead, coral bead and another 3mm bead.
6) Thread on the pendant and then repeat the beading sequence from end to beginning to get the other half of the necklace complete.
7) Thread on the last crimp tube and the other half of the filigree clasp. Take the wire around and back through the crimp tube and then pull so that you have a space of just 4mm between the crimp tube and the loop on the clasp. Crimp the tube shut and then close a crimp cover over the crimped tube. Snip away the excess wire with your side cutters.

Quantity of Items Needed
22" Beadalon Wire .015" 30ft Bright Silver Color 19 Strand (BW015)
1 Strand of Black Onyx Nuggets 8x12mm (NG939)
6 Red Coral Round Beads 6-7mm (CR522)
1 Shell Pendant with Sterling Silver Bail 2 1/4" Round (PD452)
16 Round Bead 3mm Sterling Silver (BD305)
10 Flat Spacer Ring 3.7x1mm Sterling Silver (BF335)
2 Crimp Tube Seamless 2x2mm Sterling Silver (BD315)
2 Crimp Cover 3mm Sterling Silver (BD610)
1 Filigree Clasp 19x8mm Sterling Silver (BC745)

There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top