Multi-Color Light Bulb Earring Project

Multi-Color Light Bulb Earring Project
E1023

This project sponsored by:

Quantity of Items Needed

10 Swarovski Rondelle 5.5mm Crystal/Transparent Plastic (AR5300)
3" Long Cable Link Chain 2mm Silver Plated (CN715)
2 Swarovski Tear Drop 5500 9x6mm Crystal AB (DR6001)
2 Swarovski Tear Drop 5500 9x6mm Siam (DR6008)
2 Swarovski Tear Drop 5500 9x6mm Emerald (DR6012)
2 Swarovski Tear Drop 5500 9x6mm Topaz (DR6022)
2 Swarovski Tear Drop 5500 9x6mm Indicolite (DR6923)
2 Silver Plated 15mm Lever Back Earrings (EW026)
10 Silver Plated 1.5" Headpins (HP115)
10 Swarovski 6mm Round Crystals (RB6000)

Instructions.

1) Take a headpin and thread on a Topaz Teardrop Crystal, one Plastic Rondelle, and a 6mm Crystal. Take one of the 1½" lengths of chain and attach the beaded headpin by way of a wrapped loop to the end of one of the chain lengths.

2) Take a headpin and thread on an Emerald Teardrop Crystal, one Plastic Rondelle, and a 6mm Crystal. Attach this by way of a wrapped loop to the fourth link up from the end link.

3) Take a headpin and thread on an Crystal AB Teardrop Crystal, one Plastic Rondelle, and a 6mm Crystal. Attach this by way of a wrapped loop to the third link up from the one the Emerald Teardrop Crystal is attached to.

4) Take a headpin and thread on an Siam Teardrop Crystal, one Plastic Rondelle, and a 6mm Crystal. Attach this by way of a wrapped loop to the fourth link up from the one the Crystal AB Teardrop Crystal is attached to.

5) Take a headpin and thread on an Indicolite Teardrop Crystal, one Plastic Rondelle, and a 6mm Crystal. Attach this by way of a wrapped loop to the fourth link up from the one the Siam Teardrop Crystal is attached to.

6) Open the loop at the base of the Lever Back Earwire, and attach it to the same link in the chain as the Indicolite Teardrop Crystal.

7) Repeat all steps to create the other earring.
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top