1) Take one of the Headpins and thread on one Turquoise Round Bead (DG4302). With your Chain Nose and Round Nose Pliers, make a simple loop with the remaining wire. Cut away any excess wire with your Side Cutters. Attach the loop to one of the connector loops one of the Hammered Round Links (LK033).
2) Take another Headpin and cut the "Head" part of the Headpin off nice and flush with your Side Cutters. With this end, make a simple loop. Thread on another Turquoise Round Bead, and make another Simple loop with the remaining wire (cut any wire away that you won't need). Open two of the Jump Rings (JR223). Attach one to the other side of the Hammered Round Link in step #1, and attach one end of the beaded simple loop connector that you just created. Close this jump ring. With the other open jump ring, attach it to one of the connector loops on the Oval Hammered Link (LK036) and then the onto the other Simple loop on the Beaded connector that you just created. Close this jump ring.
3) Open the connector loop on the French Earwire with your Chain Nose and Round Nose Pliers, and attach to the only other connector loop open on the Oval Hammered Link. Close the Earwire loop securely. Repeat all steps to create the other earring.
Quantity of Items Needed
4 Czech Druk Glass Round Beads 4mm Turquoise (DG4302)
4 Head Pin 1.5" 21 gauge Silver Plated (HP153)
4 Jump Ring - Open 4mm Silver Plated (JR200)
2 Link - Round Hammered 11mm Pewter Bright Rhodium Plated (LK033)
2 Link - Oval Hammered 13x9mm Pewter Bright Rhodium Plated (LK036)
2 French Hook Wire With Bead & Spring Surgical Steel (SH201)