Luck o' the Irish Earring Project

Luck o' the Irish Earring Project
E804

This project sponsored by:

1) Take one Eye Pin and open the loop slightly with your Chain Nose and Round Nose Pliers. Attach one of the Green Flower Charms to the loop. Close the loop with your Chain Nose and Round Nose Pliers.

2) Thread on one 3mm Silver Plated Bead, a Pewter Swirl Bead and another 3mm Silver Plated Bead.

3) Make a wrapped loop with the remaining eye pin wire. Cut off the excess wire with your Side Cutters. Open the loop at the base of the French Hook Wires with your Chain Nose and Round Nose Pliers and attach to the wrapped loop you just created. Close the loop at the base of the Hook Wires with your Chain and Round Nose Pliers to secure.

4) Repeat all steps to create the other earring.

Quantity of Items Needed
2 Bead Swirl 8mm Pewter Silver Plated (BD1094)
2 Round Bead 3mm Silver Plated (BD304)
2 Charm - Flower 13mm Pewter Antique Silver Plated (CM1045)
2 Eye Pin 2.5" 21 gauge Silver Plated (EP303)
2 French Hook Wire Flat With Spring Surgical Steel (SH301)
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top