Into the Blue

Into the Blue

This project sponsored by:


1) Take the chain and cut it down to two 4" lengths. Open the two Jump Rings and use these to attach one half of the Toggle Clasp to each of the lengths of chain.

2) Cut 3" off from the 21" of wire and make a wrapped loop on one end. Make sure to attach this loop to one of the free end links on one of the lengths of chain from the previous step. Finish wrapping your loop. Thread on a Czech Glass Navette and then make another wrapped loop on the other end of the wire. Before closing this loop, attach to one of the Closed Jump Rings. Cut off any excess wire from the looping after you finish with your Side Cutters.

3) Cut another 3" length of wire and make another wrapped loop, attaching the loop to the Closed Jump Ring in step #2. Thread on another Czech Glass Navette and make another wrapped loop with the other end of the wire, attaching this loop to another Closed Jump Ring. Continue with making this chain of beaded wrapped loops attached to Closed Jump Rings until you have threaded on all of the beads and Closed Jump Rings, and you're at your last wrapped loop. Attach this wrapped loop to the other free end link on the other length of chain.

To Finish.

4) Take a Headpin and thread on either a Star bead, a Mirror bead, or a Druk Glass bead. Make a wrapped loop with the remaining wire, attaching the loop to one of the Closed Jump Rings on the necklace. Repeat this step until all of the beads are attached to the Closed Jump Rings on the necklace. There should be one of each style bead in each grouping. Done!
There are no reviews for this product!

Buy Project Components

Recently Viewed Items