Green Eyes Bracelet Project

Green Eyes Bracelet Project
B831

This project sponsored by:

1) Take the 10" length of beading wire and thread on one Crimp Tube (BD363) and one half of the Toggle Clasp (CL1000). Take the wire around and back through the crimp tube. Pull the wire so that the crimp tube cinches up close to the connector on the toggle half. Crimp the tube with your Crimping Pliers (PL125), and cut off any excess wire with your Side Cutters.

2) Start your beadwork.
1
Pearl (PR690)
1
4mm Bead Frame (BF1004) - thread one 4mm Khaki Round Bead inside the frame
1
Pearl (PR690)
1
6mm Bead Frame (BF1010) - thread one 6mm Khaki Round Bead inside the frame

* repeat four more times

3) Thread on one Pearl (PR690), the last 4mm Bead Frame (BF1004), with the last 4mm Khaki Round Bead threaded on inside the frame. Thread on the last Pearl (PR690), the last Crimp Tube and the other half of the Toggle Clasp (CL100).

4) Take the wire around and back through the Crimp Tube. Pull the wire tight so that the Crimp Tube cinches up to the connector loop on the Toggle half, and so that most of the slack has been taken out. Crimp the tube with your Crimping Pliers, and cut the excess wire off with your Side Cutters.



Quantity of Items Needed
2 Crimp Tube Seamless 2x2mm Gold Plated (BD363)
6 Round Bead Frame 4mm Pewter Antique Gold Plated (BF1004)
5 Round Bead Frame 6mm Pewter Antique Gold Plated (BF1010)
10" Beadalon Wire .015" 30ft Bright Silver Color 19 Strand (BW015)
1 Toggle Clasp 14x17.5mm Pewter Gold Plated (CL1000)
12 Freshwater Potato Pearl Dark Olive 6-7mm (PR690)
6 Swarovski Round 5000 Bead 4mm Olivine (RB4315)
5 Swarovski Round 5000 Bead 6mm Khaki AB (RB6552)

There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top