[categoryname]

Glacier Necklace

Glacier Necklace
N981

This project sponsored by:

Instructions.


1) Take 20" of Beading Wire, and thread on one Crimp Tube, and one half of the Toggle Clasp. Bring the wire around and back through the Crimp Tube. Slide the Crimp Tube close to the clasp and crimp it using your Crimping Pliers. Cut the excess wire using your Side Cutters.

2) Start your beadwork.
1
Swarovski Crystal Bicone (3mm/White Opal)
1*
Swarovski Crystal Pearl (6mm/Night Blue)
1
Swarovski Crystal Round Bead (4mm/Sapphire)
1
Sterling Silver Bead Cap
1
Swarovski Crystal Round Bead (8mm/Dark Indigo)
1
Sterling Silver Bead Cap
1
Swarovski Crystal Bicones (3mm/White Opal)
1
Swarovski Crystal Round Bead (10mm/Air Blue Opal)
1
Swarovski Crystal Bicones (3mm/White Opal)
1
Gold Filled Bead Cap
1
Swarovski Crystal Round Bead (8mm/Dark Indigo)
1
Gold Filled Bead Cap
1
Swarovski Crystal Bicones (3mm/White Opal)
1
Swarovski Crystal Round Bead (10mm/Air Blue Opal)
1
Swarovski Crystal Bicones (3mm/White Opal)
1
Sterling Silver Bead Cap
1
Swarovski Crystal Round Bead (8mm/Dark Indigo)
1
Sterling Silver Bead Cap
1
Swarovski Crystal Round Bead (4mm/Sapphire AB)
1
Swarovski Crystal Pearl (6mm/Night Blue)
1
Swarovski Crystal Bicone (4mm/White Opal)
1
Swarovski Crystal Polygon Bead (18x12mm/Jet)
1
Swarovski Crystal Bicone (4mm/White Opal)

4) Repeat this pattern from * for all of the beads, finishing the sequence with a Sapphire AB round, a Night Blue Pearl, and a 3mm White Opal Bicone. Then, thread on the last Crimp Tube, and the other half of the Toggle Clasp.

To Finish.

5) Thread the Beading Wire back through the Crimp Tube. Pull the wire tight until the Crimp Tube is snug against the clasp. Crimp the tube using your Crimping Pliers, and cut excess wire as close as you can to the crimped tube using your Side Cutters. Enjoy!
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top