Envirotex Lite Pour-On Gloss Finish (4 oz. Kit)

In Stock

Sales Unit:

1 - 2 $9.75 3 - 5 $9.26 6+ $8.78
USA: Free Shipping on orders over $49*


  • Size: 4 oz.
  • _HIDE_KEY_1: 4-Ounce kit covers approximately 1 square foot at 1/16-Inch
  • _HIDE_KEY_2: Add a glossy protective coat to sculpted jewelry

EnviroTex Lite is a pour on gloss finish, curing to a thick glossy coating after about 8 hours. It reaches full cure after 48 hours. EnviroTex Lite requires no polishing and ensures a high gloss appearance. This product is perfect for use as a sealant to add a glossy protective coat to sculpted jewelry or other craft projects. Each 4 oz kit is enough mixture to cover one square foot.

Product Usage

Before adding a gloss coat to porous surfaces, like fabric, dried flowers, wood, or paper, spray EnviroTex Clear Spray Sealer on your object to seal the surface.

The gloss coating product is packed as one part resin and one part hardener, and mixed in a 1:1 ratio. Use our graduated measuring cups, to measure exactly 1:1 or the resulting mixture will be soft and/or sticky. When mixing the two parts be sure to scrape the sides with stir sticks or your mixing cup to ensure an even mixture.

After mixing for two full minutes, pour the contents of your first cup into a second mixing cup and use a new stir stick to stir the contents of the second cup for another full minute. After this third minute, immediately pour the contents of the second cup onto your project, in an even pattern. If necessary, spread the mixture using a stiff piece of paper.

After about 15 minutes, air bubbles will rise to the surface. You can easily break these bubbles by gently exhaling on them until they disappear.

Full product instructions are included with each package

Customer Reviews
There are no reviews for this product!

Related Items

Recently Viewed Items