Wonderful accent to the Holiday season!
Recommended Tools: Chain Nose Pliers (PL490
), Round Nose Pliers (PL491
), Side Cutters (PL495
1) If your headpins are bent, you can use your nylon jaw pliers to straighten them out. If you don’t have nylon jaw pliers, hold the headpin just under the flat end with your chain nose pliers and pull a cloth along the length of the headpin a couple of times to achieve a straight headpin.
2)With one of the headpins, thread on one 10mm Pearl, and 8mm Pearl, a Rondelle, a 6mm Pearl, a 8mm Lochrose, and a Cube bead. Create a Simple Loop with the remaining headpin wire, cutting off the excess wire with your side cutters.
3) Open the loop slightly and attach to one of the loops at the base of one of the Fish Hook earrings. Close this loop securely.
4) Repeat all steps to create the other earring.