Swarovski Daisy Spacers are stacked to create Christmas Trees.
Recommended Tools: Chain Nose Pliers (PL490
)and Round Nose Pliers (PL491
)and Side Cutters (PL495
1) Take one of the Headpins and thread on one Crystal Copper Cube, two 10mm Daisy Beads, one 8mm Daisy Bead, one 6mm Daisy Bead, and one Light Siam AB Bicone.
2) With your Chain Nose and Round Nose Pliers, make a simple loop with the remaining Headpin wire. Use your Side Cutters to cut off the excess wire.
3) Open the loop at the base of the Ear Wire the same way that you would a jump ring (side to side, not out). Slide the simple loop that you just created onto this loop, and then close the loop on the Ear Wire securely.
4) Repeat all steps to create the other earring.