Crystal Star Earring Project

Crystal Star Earring Project
E782

This project sponsored by:

Quantity of Items Needed

2 Eye Pin 1" 22 Gauge Sterling Silver (EP125)
2 Jump Ring Open 10mm Sterling Silver (JR115)
2 Ear Wire Kidney Shape 17mm Sterling Silver (KW225)
2 Swarovski Round 5000 Bead 4mm Siam (RB4008)
2 Swarovski Round 5000 Bead 4mm Emerald (RB4012)
2 Swarovski Stars 6714 20mm Crystal (ST1000)

Instructions.

1) Open one of the 10mm Jump Ring (JR115) with your Chain Nose and Round Nose Pliers. Gently attach this jump ring to one of the Crystal Stars (ST1000). Before closing this jump ring, thread on one of the Eye Pins (EP125).
2) Thread one Siam Round Bead (RB4008) and one Emerald Round Bead (RB4012) onto the Eye Pin (EP125). Make a wrapped loop with the remaining wire using the middle part of your round nose pliers to make the correct sized loop. Cut off any excess wire with your side cutters.

To Finish.
3) Open one of the Kidney Earwires (KW225) and thread on the wrapped loop. Repeat all steps to make the other earring, and you're done.
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top