Quantity of Items Needed
4 Swarovski Bicone 5328 2.5mm Light Siam (AC25273)
4 Swarovski Bicone 5328 3mm Crystal (AC3000)
8 Swarovski Bicone 5328 4mm Crystal (AC4000)
10 Swarovski Bicone 5328 4mm Light Siam (AC4273)
2 Head Pin 2" 22 Gauge Sterling Silver (HP315)
2 Jump Ring Round Open 4mm Sterling Silver (JR405)
2 Ear Wire Flat Fish Hook with Spring 23mm Sterling Silver (SH305)
1) Take one of the Headpins and thread on one 2.5mm Light Siam bicone, and a 3mm Crystal bicone. Next, thread on one 4mm Light Siam bicone, and one 4mm Crystal bicone. Repeat this three more times, then thread on another 4mm Light Siam bicone, a 3mm Crystal bicone and another 2.5mm Light Siam bicone. With your non-dominant hand holding the beaded headpin, manuver the headpin with your dominant hand so that you shape it into a candy cane shape.B Be extrememly careful with this, and if you need to give the bicones more wire to move without chipping, then do so.
2) When the Headpin is in the right shape, cut the headpin wire with your Side Cutters about 5mm from the last bead. With your Round Nose pliers, roll this small bit of wire around so that none of the bicones can fall off.
3) Open one of the Jump Rings and use this to attach the top of the beaded headpin to the loop at the base of one of the Fish Hook Earrings. Close this Jump Ring securely.
4) Repeat all steps to create the other earring.