Bench Block w/Wood Base

1 Review(s)

| Questions about this item? Ask here.

| See 1 Questions

Out of Stock

Price:$32.21

Item #:BL116

Sales Unit:

Each

BUY IN BULK AND SAVE

1 $32.21 2 $28.99 3+ $25.76

Specifications

Length: 4 Inch
Height: 1 Inch
Width: 4 Inch
Material: Hardened Steel/Wood
_HIDE_KEY_1: Highly polished for less marring or scratching
_HIDE_KEY_2: Use wood block for softer metals and Steel block for harder metals
_HIDE_KEY_3: Use a combination of wood and steel blocks for different textures
_HIDE_KEY_4: Wood helps absorb shock and noise

This bench block is made of polished, hardened steel with a hardwood backing. Ideal for flattening wire or chasing, but it also works well for hardening soft wire or metal. Simply place the wire or metal between the surfaces and whack it with a hammer. The item hardens without losing its' shape.
Size: 4"x 4"x 1"
Metal: 1/4" Thick
Wood: 3/4" Thick
Weight: 1-1/2lbs

Why do I need this item?

This product gives you the hard metal surface for shaping wire and sheet, but also provides a softer wood surface for metals such as copper. It also doubles as a "wire wacker" used to harden wire and sheet. Hammering wire or sheet against a smooth, solid, surface is necessary in order to "harden" the material so that it will retain its' finished shape.

Customer Reviews

Technical info

When selling bench blocks you should mention what measure of hardening the block . I have bought many blocks over the years and found them to be soft..should be more specific. My bench block was a propellor cylindrical bearing bought for a buck and it was hard.. that goes for your hammers as well

Did you find this helpful? 0 of 4 Found Helpful

Reviewed by: Mike ma from Canada. on 1/4/2020

There are no reviews for this product!

Customer questions & answers Ask a new question

Q: I was wondering, on this bench block, if the wood is supposed to be glued to the metal? When I took it out of the shrink wrap today, it was in 2 separate pieces and you can see where, I think, glue was supposed to be?

Asked by: Gary - 12/24/2018

A: yes they should be glued together. We can ship you a replacement or a tube of Gl600 Glue, whichever you prefer. Please contact our customer service at cs@jewelrysupply.com.
Thanks

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Ken R. (12/24/2018)

Submit an answer