Bead Frame Earring Project

Bead Frame Earring Project
E785

This project sponsored by:

1) Take one of the Head Pins (HP153) and thread on one 6mm Bead. Make a simple loop with the remaining Head Pin Wire with your Chain Nose and Round Nose Pliers. Cut off any excess wire with your Side Cutters.

2) Take one Eye Pin, and open the loop with your Chain and Round Nose pliers. Attach to the simple loop created in the last step. Close the loop. Hold one 6mm Bead inside of one Bead Frame (BF1003) and thread the Eye Pin through. Make a simple loop with the remaining Eye Pin Wire after everything is threaded on.

3) Open the loop on one of the Ear Wires (SH201) slightly. Attach this to the simple loop created in the previous step. Close the loop on the Ear Wire securely. Repeat all steps to create the matching earring.

Quantity of Items Needed
2 Bead Frame - Round 17mm Pewter Antique Silver Plated (BF1003)
2 Eye Pin 1.5" 21 gauge Silver Plated (EP113)
4 Fancy Jasper Round Beads 6mm (FJ006)
2 Head Pin 1.5" 21 gauge Silver Plated (HP153)
2 French Hook Wire With Bead & Spring Surgical Steel (SH201)
There are no reviews for this product!

Buy Project Components

Recently Viewed Items

Top