JewelrySupply carries a wide variety of solders suitable for jewelry
repair, wire working and manufacturing. Some of our solders require the
use of a torch, while others work great with one of our quality
soldering irons or even a simple match or lighter. Plumb gold solders
from JewelrySupply are Cadmium free. However, all other solders may
contain Cadmium, so please read our Prop 65 Warning before using.
All plumb gold solders from JewelrySupply.com are guaranteed to flow consistently each and every time. (Sold in 1DWT squares)
Stay Brite Solder should be used with a soldering iron or torch. This is a silver bearing solder that flows at only 430 degrees, making it an excellent choice for use on Silver, Pewter, Nickel,...
Each syringe contains 1/2 troy ounce of silver solder mixed with flux-Just the right amount needed every time. 65% Silver.
Use with torch.
Flow Temp: 1325 degrees
Each syringe contains 1/2 troy ounce of silver solder mixed with flux-Just the right amount needed every time. 70% Silver.
Use with torch.
Flow Temp: 1360
Each syringe contains 1/2 troy ounce of silver solder mixed with flux-Just the right amount needed every time. 75% Silver.
Use with torch.
Flow Temp: 1450
A low temperature silver bearing solder paste works with the heat of a match or lighter. Solder paste is mixed with flux.
Use with match or lighter
Capacity: 7.1grams
Used to solder and repair. Corrosion resistant with excellent color matching. Melts at 400° F. Solder paste is mixed with flux.
Use with match or lighter
Capacity: 7.1grams
More...
Melts at 275°F but is much stronger than other lead-tin solders. Does not tarnish and can be used to solder Platinum, Gold, Silver, Stainless Steel, Pewter and many other alloys. Use with torch or...
